A031407A USB Type C Female Connector 14Pin, Vertical 4-Pin Through-Hole DIP (Solid Pin / Fishhook Pin), L=8.2/9.3/9.8 (Shell-Free)/10.0/10.5/10.7/11.0/11.5/12.0

Vertical 4-pin Through-hole SMT Mounting and Soldering Specification: PCB pad dimensions, through-hole diameters and positioning hole positions must be designed strictly in accordance with the recommended PCB layout in the drawing. On-board installation must ensure accurate alignment of the 4 through-hole pins with the PCB through-holes, ensuring the product is perpendicular to the PCB surface after installation, no tilting and no offset. During SMT mounting, ensure the 4 through-hole pins are fully inserted into the holes, and the surface mount feet are fully attached to the pads to avoid mounting offset, pin bending and pad cold soldering. Control the temperature curve during reflow soldering to prevent thermal deformation of the plastic housing, oxidation of metal plating and damage to pin contact gold plating.

16PIN Interface Use Specification: This product is a 16PIN simplified version TYPE-C female socket, supporting USB2.0 data transmission and fast charging protocol identification. When using, it must be matched with corresponding specification TYPE-C male plugs and cables to ensure stable data transmission and normal fast charging protocol identification; avoid using non-standard cables causing signal interference, reduced transmission rate or abnormal charging.

Plating Layer Protection Notes: The gold plating layer of contact terminals and nickel plating layer of the shell are easily scratched by sharp objects. Avoid hard objects contacting the plating surface during production and use; prohibit long-term bare storage in corrosive environments such as acid-base and salt spray to prevent plating oxidation and corrosion, which will affect electrical contact performance and protection effect.

PCB Layout and Equipment Adaptation Requirements: PCB pad dimensions and through-hole diameters must be designed strictly in accordance with the product drawing, and sufficient vertical installation space and male plug insertion and extraction operation space must be reserved to avoid physical interference between the product and surrounding electronic components and equipment housing. It is recommended to control the PCB layout tolerance within ±0.05mm to ensure the accuracy of vertical through-hole mounting and welding firmness. The equipment housing opening must strictly match the male plug insertion size and the product vertical installation height to avoid interference damage to the interface during insertion and extraction.

Insertion, Extraction and Use Specification: When inserting and extracting the product, keep the male plug and female socket horizontally aligned and apply force evenly along the axial direction. Violent insertion and extraction, oblique insertion and extraction, shaking insertion and extraction and lateral pulling are prohibited to prevent bending of vertical interface pins, housing cracking and damage to internal contacts. It is prohibited to use non-standard, damaged, deformed or foreign matter-containing male plugs for insertion and extraction to prevent damage to the internal structure of the interface and scratching of the contact gold plating.

PE Vacuum Box Packaging and Storage Specification: This product adopts PE vacuum box independent packaging. Check whether the vacuum packaging is intact before opening. If there is air leakage or damage, handle it in time. The product should be used as soon as possible after opening to avoid oxidation and moisture caused by long-term bare storage. The storage environment must be kept dry, dust-free and free of corrosive gases, with temperature controlled at 5℃~35℃ and relative humidity ≤75%.

Adaptation and Selection Specification: This product is a 16PIN vertical 4-pin through-hole SMT TYPE-C female socket, and can only be used with matching standard TYPE-C male plugs. When selecting, choose according to equipment installation space and functional requirements. It is suitable for consumer electronics scenarios that are cost-sensitive and only require basic fast charging and USB2.0 data transmission. It is prohibited to assemble and use with non-standard and size-mismatched male plugs/equipment.

Transportation and Turnover Specification: During product transportation and production turnover, keep the original packaging intact. Severe impact, extrusion and dropping of cartons are prohibited to prevent vacuum box damage, product falling off and pin bending deformation. When stacking cartons, operate in accordance with the specification to avoid heavy pressure causing vacuum box deformation and product damage. Anti-static protection must be done during turnover.