A031408A USB Type C Female Connector 14Pin, Reverse SMT, 1.6mm Sinking Depth, Rear 2-Pin Through-Hole SMT, L=6.65, CH=0.00, Shell-Free Version

Sunk Plate Structure Installation and Soldering Specification: The PCB board must be designed with a sunk plate slot strictly in accordance with the drawing requirements. The slot depth and dimensions must accurately match the sunk plate part of the product to ensure the product is flush with the PCB surface after installation. The rear 2 through-hole pins must be accurately aligned with the PCB through-holes to avoid pin offset and bending. The reflow soldering temperature and time must be strictly controlled in accordance with industry standards to prevent thermal deformation of the plastic housing and poor soldering.

PCB Layout and Equipment Adaptation Requirements: PCB pad dimensions, sunk plate slot dimensions and through-hole diameters must be designed strictly in accordance with the recommended PCB layout. Sufficient male plug insertion and extraction operation space must be reserved to avoid physical interference between the product and surrounding electronic components and equipment housing. It is recommended to control the PCB layout tolerance within ±0.05mm to ensure the accuracy of sunk plate installation and production yield.

Insertion, Extraction and Use Specification: When inserting and extracting the product, keep the male plug and female socket horizontally aligned and apply force evenly along the axial direction. Violent insertion and extraction, oblique insertion and extraction and shaking insertion and extraction are prohibited to prevent bending of interface pins, housing cracking and damage to internal contacts. It is prohibited to use non-standard, damaged, deformed or foreign matter-containing male plugs for insertion and extraction to prevent damage to the internal structure of the interface.

Tape and Reel Packaging and Automatic Feeding Specification: This product adopts tape and reel packaging. The carrier tape peeling angle must be controlled within 165°~180°. When feeding with a fully automatic placement machine, strictly control the nozzle position and suction force to avoid product deformation and pin offset caused by excessive nozzle pressure. After the tape is opened, avoid pulling and bending the carrier tape to prevent abnormal peeling force and product falling off.

Transportation and Turnover Specification: During product transportation and production turnover, keep the original packaging intact. Severe impact, extrusion and dropping of reels are prohibited to prevent carrier tape deformation, product falling off and pin bending deformation. When stacking cartons, operate in accordance with the specification requirements to avoid heavy pressure causing reel deformation and product damage.

Environmental and Storage Requirements: The product must be stored in a dry, dust-free environment without corrosive gases. Avoid long-term exposure to high temperature, high humidity and acid-base corrosion environments to prevent oxidation of metal parts and aging of plastic parts. The product should be used as soon as possible after opening to avoid long-term bare storage affecting electrical contact performance.

Adaptation and Selection Specification: This product is a sunk plate rear 2-pin through-hole TYPE-C female socket, compatible with 1.00mm thickness PCB board, and can only be used with matching standard TYPE-C male plugs. When selecting, choose according to the equipment PCB thickness, installation space and functional requirements. It is prohibited to assemble and use with non-standard and size-mismatched male plugs/equipment.