中
On-board type
Waterproof Connector - TYPE-C Standard TYPE-C Connector Customized Connectors
Recessed Type On-board type Side Entry / SMT Type Vertical Mount
1
2
3
4
5

A011602B Type-C Female Connector 16PIN On-Board Four-Pin Full SMT L=7.35 Three-Mold With Post 5A

Core Advantages

  • Stable Electrical Performance, Excellent Conductivity: The product has a rated current of 3.0A, compatible with 5A application scenarios, and a rated voltage of 5.0V DC/AC. The terminals are made of C201 brass material, with an underplated nickel layer ≥50μ" and a gold-plated surface of 0.5~1μ", which has outstanding conductivity, strong oxidation and sulfidation resistance, stable contact resistance after long-term use, and low signal and power transmission loss.

  • 4-Pin Full SMT + Positioning Pillar Design, Stable and Precise Installation: Adopting an on-board 4-pin full SMT structure with a dedicated positioning pillar, it can be accurately aligned with the PCB pads during mounting, effectively avoiding mounting offset and false soldering. The finished product has strong anti-loosening, anti-shaking and anti-offset capabilities, which is perfectly suitable for automated high-speed SMT production lines, greatly improving production efficiency and yield.

  • High-Quality Material Matching, Long Service Life: The housing is made of black LCP high-temperature resistant engineering plastic, and the front shell and mid plate are made of stainless steel, which has a sturdy structure, deformation resistance and bending resistance. The overall shrapnel-free structure design avoids the risk of shrapnel fatigue failure, with an official mating life of up to 10,000 cycles, and stable performance under long-term high-frequency use.

  • Three-Mode Universal Structure, Strong Compatibility: Adopting the industry universal three-mode structure design, it is compatible with multi-category and multi-scenario electronic devices such as consumer electronics, smart home, industrial control, and automotive accessories. The dimensional tolerance is strictly controlled, the assembly consistency is good, and it is suitable for most conventional PCB layouts without additional board modification.

  • Environmental Compliance, Standardized Packaging: The product fully complies with RoHS and REACH environmental standards, has no harmful substances, and has no market access barriers at home and abroad. It adopts standardized tape and reel packaging, with 1000PCS per reel, the carrier tape peeling angle is 165°-180°, and the peeling force is stable, which is perfectly suitable for fully automatic mounters, and the whole process of storage, transportation and production feeding is convenient and efficient.

HOTLINE: 18922973271

CAD Drawing PDF Drawing 3D Drawing
Details
Specifications
Precautions

Item CategoryDetailed Parameter Information
Product ModelA011602B
Full Product NameTYPE-C Female Connector 16PIN, On-Board 4-Pin Full SMT, L=7.35mm, 3-Mode Version
Core StructureOn-board mounting, 4-pin full SMT, 3-mode universal structure, with positioning pillar, shrapnel-free design
Core DimensionsTotal length L=7.35mm, shell pin length 1.0mm, compatible with conventional PCB thickness
Housing MaterialBlack LCP high-temperature resistant engineering plastic, compliant with UL94 V-0 flame retardant grade
Terminal MaterialC201 brass, excellent electrical conductivity, strong deformation resistance
Shell/Mid Plate MaterialStainless steel, sturdy structure, corrosion resistance and deformation resistance
Terminal Plating SpecificationUnderplated nickel ≥50μ" Min, surface gold-plated 0.5~1μ"
Shell Plating SpecificationOverall nickel-plated ≥50μ" Min
Pin Definition16PIN standard TYPE-C pin layout, covering full-function pins including GND, VBUS, CC1/CC2, D+/D-, SBU1/SBU2
Version ReleaseNew board released on November 06, 2020, version A
Environmental StandardCompliant with RoHS and REACH environmental compliance requirements
Standard PackagingTape and reel, 1000PCS/reel, 15 reels/standard shipping carton
Carrier Tape Specification16-pocket carrier tape design, peeling angle 165°-180°, meeting the feeding requirements of fully automatic mounters

1. Electrical Performance Parameters

  • Rated Voltage: 5.0V DC/AC

  • Rated Current: 3.0A (compatible with 5A application scenarios)

  • Terminal Plating: Underplated nickel ≥50μ" Min, surface gold-plated 0.5~1μ"

  • Shell Plating: Overall nickel-plated ≥50μ" Min

  • Insulation Resistance: ≥100MΩ (refer to the same series standard)

  • Contact Resistance: ≤40mΩ (refer to the same series standard)

2. Mechanical Performance Parameters

  • Structure Form: On-board 4-pin full SMT, 3-mode universal structure, with positioning pillar, shrapnel-free design

  • Mating Life: ≥10,000 cycles

  • Insertion Force: 0.5~2.0kgf (refer to the same series standard)

  • Extraction Force: ≥0.5kgf (refer to the same series standard)

3. Dimension and Tolerance Standards

  • Total Length: L=7.35mm

  • Shell Pin Length: 1.0mm

  • Linear Tolerance: X.xxx±0.10mm, X.xx±0.15mm, X.x±0.20mm

  • Angle Tolerance: ±10°

  • Drawing Scale: 1:1, unit mm

4. Environmental and Process Parameters

  • Operating Temperature: -25℃~+85℃

  • Soldering Process: Compatible with SMT reflow soldering, peak temperature 260℃±5℃

  • Flame Retardant Grade: Housing UL94 V-0

  • Environmental Compliance: RoHS, REACH

  • Mounting Method: On-board 4-pin full SMT, compatible with automated high-speed SMT production lines

5. Packaging Specification Parameters

  • Packaging Form: Tape and reel

  • Quantity Per Reel: 1000PCS/reel

  • Standard Carton: 15 reels/carton

  • Carrier Tape Design: 16-pocket carrier tape, peeling angle 165°-180°

  • Carrier Tape Head/Tail: ≥16 empty pockets reserved at both ends, no product loaded


  • Mounting and Soldering Specifications: During SMT mounting, the built-in positioning pillar of the product must be accurately aligned with the positioning hole on the PCB to avoid mounting offset and pad misalignment. The peak temperature of reflow soldering must be strictly controlled within the range of 260℃±5℃, and the high-temperature residence time must not exceed industry standards, to prevent thermal deformation of the LCP housing and oxidation damage of the metal plating.

  • PCB Layout and Adaptation Requirements: The PCB pad size and positioning hole position must be designed in strict accordance with the product drawing, and sufficient mounting space must be reserved to avoid physical interference between the product and surrounding electronic components. It is recommended that the PCB layout tolerance be controlled within ±0.05mm to ensure the mounting yield.

  • Mating and Usage Specifications: When mating the product, the male plug and female socket must be horizontally aligned with uniform force. Violent mating, oblique mating, and shaking mating are prohibited, to prevent terminal deformation, shell cracking, and positioning pillar fracture, which may affect the electrical performance and service life of the product.

  • Environmental and Storage Requirements: The product must be stored in a dry, dust-free environment without corrosive gases, with the storage temperature controlled at 5℃~35℃ and relative humidity ≤75%. Avoid long-term exposure to high temperature, high humidity, acid-base corrosion environments, to prevent oxidation of the metal plating and aging of the housing. The product should be used as soon as possible after opening, to avoid long-term exposed storage.

  • Adaptation and Selection Specifications: This product can only be used with standard TYPE-C 16PIN male plugs. Mating with non-standard, custom-made, damaged or deformed male plugs is prohibited, to prevent damage to the internal structure of the interface, poor contact, short circuit and other problems.

  • Transportation and Turnover Specifications: During product transportation and production turnover, the original packaging must be kept intact. Severe impact, extrusion, and dropping of the tape and reel are prohibited, to prevent carrier tape deformation, product falling off, and pin bending. After the tape is opened, avoid pulling or bending the carrier tape, to prevent abnormal peeling force from affecting automatic feeding.


Back Next
HOTLINE
  • 18922973271
WeChat